HUTIRA – PLYN
plyn@hutira.cz
+420 541 212 144
English
    • Hutira
    Menu
    1. Products
    2. Gas
    3. Accessories
    4. Gas meters
    5. Gas meters
    Gas meters | HUTIRA

    Gas meters

    ITRON gas meters for secondary and billing measurements, including accessories (PREMAGAS, ELSTER only on request). Diaphragm/Rotary/Turbine/Quantometers.

    Membrane gas meters:

    Flow rate volume: from 0,04 m3/h to 65 m3/h, G4 to G40
    Maximum operating pressure: 0,5 bar (1 bar – G25, G40)
    Operating temperature: -25 °C to +55 °C
    Material: sheet steel
    Medium: natural gas, air, propane, butane, non-corrosive gases

    Gas meters | HUTIRA

    Rotary gas meters:

    Flow volume: from 0,25 m3/h to 1000 m3/h, G10 to G650
    Dimension: DN25 to DN150
    Maximum operating pressure: up to 100 bar depending on body material and flange

    Material: aluminium, ductile iron or steel
    Operating temperature: -25 °C to +55 °C
    Measuring range: up to 1:200

    Medium: natural gas, non-corrosive gases

    Gas meters | HUTIRA

    Turbine gas meters:

    Flow volume: from 5 m3/h to 10 000 m3/h, G65 to G6500
    Dimension: DN50 to DN400
    Maximum operating pressure: up to 100 bar depending on body material and flange

    Material: ductile iron, cast steel, welded steel

    Operating temperature: -25 °C to +55 °C
    Measuring range: 1:20, 1:30 by type
    Medium: natural gas, non-corrosive gases

    Gas meters | HUTIRA

    Quantometers:

    Flow volume: from 6 m3/h to 2 500 m3/h
    Dimension: DN50 to DN200
    Maximum operating pressure: up to 40 bar depending on flange type
    Material: ductile iron
    Operating temperature: -30 °C to +60 °C
    Medium: natural gas, non-corrosive gases

    Gas meters | HUTIRA

    Overview of variants

    MEMBRANE GAS METERS ROTARY GAS METERS TURBINE GAS METERS QUANTOMETERS
    G4 up to 0,5 bar, Qmax – 6 m3/h, neck pitch 100/110 mm DELTA COMPACT G16/25/40, DN40/50, 171mm TZ 50 G 65, DN50, 150mm MZ50 G65 DN50 sandwich 60mm
    G6 up to 0,5 bar, Qmax – 10 m3/h, neck pitch 250mm DELTA SE G65, DN50, 171mm TZ 80 G 100, DN80, 240mm MZ80 G160 DN80 sandwich 120mm
    G10 up to 0,5 bar, Qmax – 16 m3/h, pitch 250/280 mm DELTA SE G100, DN50, 171mm TZ 80 G 160, DN80, 240mm MZ80 G250 DN80 sandwich 120mm
    G16 up to 0,5 bar, Qmax – 25 m3/h, pitch 250/280 mm DELTA SE G100, DN80, 171mm TZ 80 G 250, DN80, 240mm MZ100 G250 DN100 PN10/16 150mm
    G25 up to 1 bar, Qmax – 40 m3/h, pitch 280mm DELTA SE G160, DN80, 171mm

     

    		 TZ 100 G 160, DN100, 300mm MZ100 G400 DN100 PN10/16 150mm
    G40 up to 1 bar, Qmax – 65 m3/h, DN80, vertical DELTA 2080 G 250, DN80, 241mm TZ 100 G250, DN100, 300mm
    TZ 100 G400, DN100, 300mm
    TZ G650 až G 4000, do DN 500

           Accessories:

    • Impulse sensor INZ 61 NF sensor for remote data transmission / gas meters ELSTER G4-G65 /
    • Impulse sensor ITR NF sensor for remote data transmission / gas meters ITRON (GALLUS G4)
    • Impulse sensor ITR NF sensor for remote data transmission / for ITRON gas meters (G6-RF1)
    • Impulse sensor ITR NF sensor for remote data transmission / for ITRON gas meters (G10-40)
    • MBus PadPuls M1 Accessories for gas meters with O series counter
    • Cyble MBus Accessories for gas meters with C series counter
    • Cyble Sensor Accessories for gas meters with C series counter
    • Gas meter screw union G4 to G25

    Advantages of the product

    Membrane gas meters

    • Readiness for remote reading and data management
    • Long-term accuracy and reliability
    • Robust, maintenance-free gas meter
    • High corrosion resistance

    Rotary gas meters

    • Excellent measurement stability
    • Installation conditions or intermittent flow rate do not affect the measurement
    • Optimized pressure loss for low pressure networks
    • Possibility of installation in various positions
    • Counter standard equipped with Cyble target and rotatable through 360°

    Turbine gas meters

    • Resistance to turbulent interference
    • Reduced pressure drop for low pressure networks
    • Excellent high pressure behaviour
    • IP67 counter protection
    • Counter equipped as standard with Cyble target

    Quantometers

    • Specially designed for industrial use and for secondary measurements
    • Flow rate up to 2500 m3/h
    • Counter equipped as standard with Cyble target
    • Possibility of a version for aggressive gases